Eicon Networks ISDN NT1 Especificações descarregar pdf (Página 8)

8 Making an ISDN Connection

Making an ISDN Connection

Note

Only the Eiconcard C91 supports ISDN connections.

After you have installed your Eiconcard C91, connect your ISDN

line.

In Europe and most countries worldwide

In Europe as well as most countries outside of North America and

Japan, your Eiconcard C91 adapter can be connected directly to

your ISDN line using the included cable.

Figure 3. Connecting the ISDN cable.

1 Take the cable included with the Eiconcard C91.

2 Plug one end into the Eiconcard C91.

3 Plug the other end into the ISDN wall jack.

In North America and Others

In North America and some other countries (check with your ISDN

provider), you need an NT1 (network terminating device) to connect

your ISDN line. However, depending on your Eiconcard C91

interface, the NT1 might be integrated into the adapter. Follow the

instructions for your adapter (with U-interface or S/T-interface).

Note

North American and Australian Eiconcard C91 S/T users may

need to adjust the Eiconcard C91 termination. Refer to the section

“Termination” on page 11, for more information.

Eiconcard C91

ISDN wall jack

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sem comentários

Eicon Networks ISDN NT1 Especificações Página 8