Eicon Networks S93 Guia de Instalação descarregar pdf (Página 112)

Installation in Unattended Mode 112

The call to initiate the installation is:

Installing multiple adapters

You can install a single Diva Server adapter with all required interfaces with one activation

of the Windows NT 4.0 setup. In this case, all information must be present in a single

options file in the unattended format described in the previous chapters.

If you want to install multiple Diva Server adapters in one server, you need to activate the

Windows NT setup for each adapter. In this case, the interfaces, e.g. WAN Miniport, must

be installed after all adapters have been installed. Thus, in the options file(s) used for the

installation of the adapters, you may either set all items of the general section to ‘NO’ or

delete the general section.

To install two Diva Server BRI-2M adapters with the support of RAS and CAPI services

do the following:

Note: These instructions assume that you have completed the Preparing the script file

process, see page 107

1. Create one options file per Diva Server adapter containing the parameters specific to

the adapter. Ensure that the general section is empty or that all items are set to ‘NO’.

The options for the WAN-Miniport and CAPI interfaces are defined in separate files.

Note: Generally, the WAN-Miniport options may be described in any of the options

files. Nevertheless, it is recommended to use a separate options file.

2. Activate Windows Setup with the Interface Name set to DSBRI and the options file

for the first adapter.

3. Activate Windows Setup with the Interface Name set to DSBRI and the options file

for the second adapter.

4. Activate Windows Setup with the Interface Name set to WAN and the options file that

contains the WAN section.

5. Activate Windows Setup with the Interface Name set to CAPI.

%WINDIR%\SYSTEM32\SETUP.EXE

/t NTN_InstallMode = install

/t NTN_Origination = ncpa

/I "ncpashel.inf"

/t NTN_Infname = %WINDIR%\SYSTEM32\OEMNDA01.INF

/t NTN_InfOption = DSBRI

/t NTN_SRCPATH = D:\EICON\NT

/t STF_GUI_UNATTENDED = "YES"

/t STF_UNATTENDED = D:\EICON\NT\DSBRI.INI

/t STF_UNATTENDED_SECTION = DSBRI

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 129 130

Sem comentários

Eicon Networks S93 Guia de Instalação Página 112