Eicon Networks C20 Manual de Instruções descarregar pdf (Página 130)

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Common System Procedures

Page 3-20Backing Up (Attended)

5. Make sure that there are enough cartridge tapes to accommodate the

backup.

The system displays the following message:

Verify whole backup tape(s) will double the amount of

backup time.

Do you really want to verify tape(s)?

(Strike y or n)

6. The Lucent I

NTUITY system verifies a backup tape by reading back the

entire set of data it has just written on the tape.

NOTE:

Verifying the back-up tape increases the total time for backup from

1-1/2 hours to 3 hours. Verification is not necessary to ensure a good

back-up tape.

To verify the back-up tape, press

. If you do not want to verify the backup

tape, press

The system displays the following message:

please insert a tape into the tape drive to back up

tape 1

press <Enter> when tape is inserted

press <Esc> key to terminate the backup

7. Insert the first cartridge tape in the tape drive. See “Inserting the Cartridge

Ta p e ” above for this procedure.

8. Press when the tape drive is idle.

The system displays a series of messages indicating what is being stored

on the backup tape.

NOTE:

The light on the 2-Gbyte drive will blink when the drive is in use. If the

light is not blinking, the tape drive is idle.

9. If another tape is necessary:

a. Remove the current tape. See “Removing the Cartridge Tape

”

above for this procedure.

b. Label the tape with the current date and back-up data type(s).

c. Insert the next tape. See “Inserting the Cartridge Tape

” above for

this procedure.

If another tape is not necessary, continue with Step 10.

ENTER

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 409 410

Comentários a estes Manuais

Sem comentários

Eicon Networks C20 Manual de Instruções Página 130

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Eicon Networks C20