Eicon Networks DIVA T/A ISDN Modem Guia do Utilizador descarregar pdf (Página 104)

Chapter Nine: Advanced Installations Installing on an existing LAN

104

To define a backup profile and set the profile restore delay

On the Configuration main menu, click Connection Profiles.

Click Edit for the profile you want to define a backup profile for. You will see the following page.

Choose a Backup profile from the list.

Set a value for Profile restore delay. (This value must be greater than 0, if you want to use a backup

profile.)

Click Finish.

Click Save.

Click Reset.

Installing on an existing LAN

Installing the DIVA LAN ISDN Modem on an existing LAN can be extremely simple, or quite challenging,

depending on the complexity of your existing LAN setup. To help you successfully integrate the DIVA LAN

ISDN Modem into your setup, this section presents an installation strategy that should work in the majority of

cases. However, due to the wide range of networking equipment and topologies that are in use worldwide, your

configuration needs may fall outside the strategy presented here. In this case, you should contact your network

administrator, or other support person to help you with your installation.

Using Modem Monitor

Modem Monitor greatly simplifies the task of installing the DIVA LAN ISDN Modem on a LAN. If at least

one of the computers on your LAN is running Windows 95/98/NT, follow the instructions in Chapter Two to

install and configure the DIVA LAN ISDN Modem. However, make the following exceptions:

• Instead of connecting the DIVA LAN ISDN Modem directly to your computers, connect it to the LAN.

Do this by connecting any one of the DIVA LAN ISDN Modem’s ETHERNET ports to a port on your

LAN hub.

If your hub has a cross-over switch or cascade port, you can use the supplied blue Ethernet cable to make this

connection. If not, you will need a special cross-over Ethernet cable to make this connection.

Try connecting the supplied blue cable to the hub, if the green Ethernet light on the DIVA LAN ISDN

Modem does not light up, you need a special cross-over cable.

• Install the Modem Monitor software on a Windows 95/98/NT computer that is connected to the LAN.

Modem Monitor will automatically detect the DIVA LAN ISDN Modem and let you adjust its IP settings

for proper operation on the LAN.

Once installation is complete, you may need to adjust the configuration settings of the computers on your

LAN. See “Adjusting configuration settings on the LAN” on page 106 for complete details.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 190 191

Sem comentários

Eicon Networks DIVA T/A ISDN Modem Guia do Utilizador Página 104