Eicon Networks DIVA T/A ISDN Modem Guia do Utilizador Página 54
- Página / 191
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Chapter Five: Minimizing ISDN Charges Configuring AO/DI
54
4.
Click the More button next to the Protocol field. You will see the following page.
5.
Set the BACP parameters as required.
6.
Click Save.
7.
Click Finish.
8.
Click Save.
9.
Click Reset.
Configuring AO/DI
AO/DI lets you maintain a permanent connection to the Internet or a corporate network, without tying up an
expensive ISDN B-channel. AO/DI accomplishes this by using the ISDN D-channel to establish a
low-bandwidth (9.6 kbps) connection with your ISP or corporate network. When incoming or outgoing traffic
exceeds the capabilities of the D-channel, AO/DI automatically invokes one or more B-channels to handle the
increased traffic.
Some advantages of AO/DI include:
• Makes maintaining a permanent connection to the Internet more cost effective. With such a connection,
remote users can connect with the DIVA LAN ISDN Modem from any remote location that has Internet
access. This eliminates the need to dial in via ISDN. (To make the connection permanent you must set the
idle timer to 0. See page 51.)
• Ideal solution for connecting to a remote corporate network, because low-bandwidth keep alive traffic can
use the D-channel, instead of constantly bringing up a B-channel.
You customize how AO/DI opens and closes B-channels by setting the following parameters.
•
Delay for opening the 1st
B-
channel:
Sets the amount of time data traffic on the ISDN D-channel must
exceed the specified Threshold value, for AO/DI to bring up the first B-channel.
•
Threshold for opening the 1st
B-
channel:
Sets the percentage of total bandwidth on the D-channel that
must be exceeded, for AO/DI to bring up the first B-channel.
•
Delay for closing the 1st
B-
channel:
Sets the amount of time data traffic on the ISDN D-channel must be
below the specified Threshold value, for AO/DI to drop the first B-channel.
•
Threshold for closing the 1st
B-
channel:
Sets the percentage of total bandwidth on the D-channel that
traffic must be below, for AO/DI to drop the first B-channel.
•
Delay for opening the 2nd
B-
channel:
The amount of time data traffic on the first B-channel must
exceed the specified Threshold value, for AO/DI to bring up the second B-channel.
•
Threshold for opening the 2nd
B-
channel:
Sets the percentage of total bandwidth on the first B-channel
that must be exceeded, for AO/DI to bring up the second B-channel.
•
Delay for closing the 2nd
B-
channel:
Sets the amount of time data traffic on the first B-channel must be
below the specified Threshold value, for AO/DI to drop the second B-channel.
•
Threshold for closing the 2nd B-channel:
Sets the percentage of total bandwidth on the first B-channel
that traffic must be below, for AO/DI to drop the second B-channel.
- DIVA LAN ISDN Modem 1
- User’s Guide 1
- Table of Contents 3
- Chapter Three: 4
- Chapter Four: 4
- Chapter Five: 4
- Chapter Six: 5
- Chapter Seven: 5
- Chapter Eight: 6
- Chapter Nine: 6
- Chapter Ten: 6
- Appendix A: 7
- Appendix B: 7
- Appendix C: 7
- Appendix D: 8
- Introduction 9
- Internet 10
- Connecting more computers 12
- Total network security 12
- Summary of features 13
- Contacting customer services 14
- Getting Started 15
- 1. Installation overview 16
- 2. Prepare for installation 17
- Important ISDN concepts 19
- ISDN channel usage 19
- Multilink PPP 20
- Multilink PPP + BACP 20
- Multilink PPP + AO/DI 20
- Gather ISDN information 22
- Gather X.25 information 23
- Gather V.120 information 23
- Power Supply 24
- FaxPhone 24
- ISDN Wall Outlet 24
- To install Modem Monitor 26
- What’s next? 34
- Starting Modem Monitor 36
- Properties dialog box 37
- Utilities dialog box 38
- Options dialog box 38
- Status Viewer 39
- Profile table 40
- Utilities 40
- Chapter Four 41
- Saving configuration settings 43
- Getting help 43
- General settings 43
- Connection profile settings 43
- Editing the ISP profile 44
- Editing LAN settings 45
- Viewing status information 46
- Obtaining statistics 47
- Eicon\DIVA LAN ISDN Modem\ELM 48
- Resetting to factory defaults 49
- Minimizing ISDN Charges 50
- The Cost Control page 51
- Data call thresholds 52
- ISDN billing intervals 52
- Configuring BACP 53
- Configuring AO/DI 54
- X.25 on the D-channel 56
- Click Save 57
- Click Reset 57
- Setting ISDN active intervals 58
- Spoofing NetBIOS services 59
- Data compression 60
- Manual dialing 61
- Restricting analog calls 62
- Data over voice 63
- Traffic filtering 64
- Security 65
- Security features 66
- System password 67
- Automatic log out 67
- Network address translation 68
- Remote management 70
- Incoming data calls 72
- Call authentication 74
- Custom security features 78
- Setting up the Phone Ports 79
- Assigning phone numbers 80
- Call bumping 84
- Supplementary services 86
- Call Hold 87
- Call Waiting 87
- Notes on call bumping 89
- Call Forwarding 90
- Three-party Conference Call 91
- Terminal Portability 92
- Chapter Eight 93
- Overview 94
- 1. Gather information 95
- Minimizing your ISDN charges 100
- Configuring security features 101
- Advanced Installations 102
- Connection retries 103
- Using Modem Monitor 104
- Manual installation 105
- 106 106
- To create a VPN 108
- Connecting to the VPN 109
- Defining routes 110
- IP routes 111
- 117 117
- 118 118
- IP filters 119
- Default filters 120
- To define a filter 120
- Action Direction 121
- Source /Destination 121
- Location 121
- ProtocolAddress 121
- 122 122
- IP filtering examples 123
- 124 124
- Blocking web surfing 125
- 126 126
- Making a V.120 connection 127
- 128 128
- SecurID support 129
- 130 130
- Other Configuration Tools 131
- Configuration options 132
- Web interface 133
- TFTP interface 133
- 134 134
- DTMF interface 135
- Command line interface (CLI) 136
- 137 137
- About configuration context 138
- Connection profiles 138
- Default profiles 138
- Command line reference 138
- Loading firmware with the CLI 138
- 139 139
- TCP/IP Configuration 140
- Installing TCP/IP 141
- Configuring TCP/IP 141
- 142 142
- 143 143
- 144 144
- Configuring TCP/IP on an iMac 145
- Technical Information 146
- 147 147
- E1, E2, E3, E4 148
- 149 149
- 150 150
- Termination 151
- Command Line Reference 152
- Notational Conventions 153
- Commands 154
- Callback 155
- Call screening 156
- Call thresholds 157
- 158 158
- 159 159
- Ethernet 160
- 161 161
- 162 162
- 164 164
- 165 165
- 166 166
- IP routing 167
- IP various 167
- 168 168
- 169 169
- 170 170
- 171 171
- ISDN Access Time 172
- Logging and Mail Trace 173
- 174 174
- SHOW MLPPP CONFIGURATION 175
- 176 176
- 177 177
- 178 178
- 179 179
- 180 180
- Profiles 181
- 182 182
- 183 183
- 184 184
- Time Protocol 185
- 186 186
- V.120 Scripting 187
- 188 188
- 189 189
- Regulatory Information 190
- Safety Status: TNV-1 191
- Power Consumption 191
Manuais e produtos relacionados com Redes Eicon Networks DIVA T/A ISDN Modem
Redes Eicon Networks Eicon 1550 Especificações
(8 páginas)
(8 páginas)
Redes Eicon Networks 800-241 Guia do Utilizador
(52 páginas)
(52 páginas)
Redes Eicon Networks 1530 Guia do Utilizador
(162 páginas)
(162 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais