
Technical specifications Eiconcard S series
page 40
External interface
VHSI ports
• VHSI ports connect to 36-pin high-density male connectors
• Support for V.24, V.35, EIA-530, and V.36/RS-449
• X.21 with V.11 (X.27) signaling
• Internal or external clocking (DTE or DCE) or split (transmit internal,
receive external)
Power requirements
Note The Eiconcard S94 PCIe always draws less than 10W from the bus
connector supply.
Power consumption
Warning: Check that the power supply will not be overloaded. Maximum
power consumption of the Eiconcard is stated above. The user should check
that the total power drawn by the host computer, the Eiconcard, and any
other peripherals, does not exceed the capability of the host power supply
unit.
Model External Interface
Eiconcard S90 One 36-pin “D Type” female ports.
Eiconcard S91S/T One 36-pin “D Type” female port and one
RJ-45 port.
Eiconcard S91 V2 One 36-pin “D Type” female port and one
RJ-45 port.
Eiconcard S92 Two 36-pin “D Type” female ports.
Eiconcard S94 Two 36-pin “D Type” female ports.
Eiconcard S94/66 MH Two 36-pin “D Type” female ports.
Eiconcard S94 V2 Two 36-pin “D Type” female ports.
Eiconcard S94 PCIe Two 36-pin “D Type” female ports.
Eiconcard +3.3V +5V +12V -12V
Eiconcard S90 — 1 A 45 mA 50 mA
Eiconcard S91S/T — 1 A 45 mA 50 mA
Eiconcard S91 V2 — .7 A — —
Eiconcard S92 — 1.8 A 45 mA 50 mA
Eiconcard S94 — 1.8 A 45 mA 50 mA
Eiconcard S94/66MHz — 1.8 A 45 mA 50 mA
Eiconcard S94 V2 — .5 A — —
Eiconcard S94 PCIe .4 A — — —
64-0308-09.fm Page 40 Monday, March 15, 2010 3:32 PM
Comentários a estes Manuais