Eicon Networks C21 Guia de Instalação descarregar pdf (Página 69)

ECCARD: Starting the Eiconcards 69

Using ECCARD

The following examples show how the different ECCARD options can be used.

ECCARD START

The ECCARD START command starts the specified Eiconcard or port. When

you start an Eiconcard all X.25 and Frame Relay ports are automatically started

unless you turn off the Auto-activate option (see previous topic).

Consider these examples:

ECCARD START

Starts all Eiconcards in the gateway PC.

ECCARD START /SHOW

Starts all Eiconcards and displays each software module as it is loaded

onto the Eiconcard.

ECCARD START /E 4

Starts Eiconcard #4.

ECCARD STOP

Stops the specified Eiconcard or port. Stopping an Eiconcard halts all ports on

it. Any active connections are lost. Stopping the last or only port on an

Eiconcard does not stop the Eiconcard itself; you must explicitly stop it.

Examples

ECCARD STOP /E 3

Stops Eiconcard #3 and displays the following:

Do you really want to stop CARD 3? (Y/N) Y

Eiconcard 3 stopped.

Command completed successfully.

ECCARD STOP /E 2 /Y

Stops Eiconcard #2, and suppresses the Yes/No message:

Eiconcard 2 stopped.

Command completed successfully.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 214 215

Sem comentários

Eicon Networks C21 Guia de Instalação Página 69